|
Department
of Physics
PEDL Home
- Cookbooks
- Components
|
|
> Department of Physics
> PEDL
> PEDL Components
PEDL Components
The PEDL stocks a wide array of components, focusing on
the needs of the academic and specific research interests within the
department. We re-stock components on an on-demand basis. At any given time
what we have on-hand generally represents past and current activities within
the Department. If you have a special request or are in need of components
that you do not see listed on this page, check with the PEDL staff. Often we
will have what you need or can offer a reasonable substitute.
|
Components on hand
- Capacitors: pF to Farad in Silver Mica, Polypropylene, Polyester Film,
Tantalum, Ceramic X7R, Electrolytic
- Resistors: Extensive collection of 1% and 5% resistors and trimpots
- IC Devices: Timers, counters, gates, op amps, logic
- SMD: 1206 Resistors 0 to 1.0 megaohm, 1206 Capacitors 1pF to 10uF, trimpots 10
to 1 Mohm, assorted SMT IC's
- Other electronics: Voltage regulators, diodes, transistors, rectifiers, relays
- Wire: Hookup wire in 4 sizes and 10 different colors, assorted ribbon and coax
cable
- Connectors: banana, RF, audio, power pole, terminal blocks, D-Sub 9-pin, 15 pin,
25-pin, 37-pin
- Soldering: Soldering and de-soldering irons and tools, heat gun, solder, paste,
heat-shrink tubing
- Hardware: LED's and Fuses and their holders, metal and nylon nuts, bolts,
washers, and standoffs, sheet metal screws, project enclosures/boxes, power
cords, transformers, power supplies, variacs
|
|